First the AMS not every print fails!

Bambu Lab X Series Bambu Lab X1C
1

I was upset about the ams failing with no fix in sight but at least I could print from the external route. Since the new download every print fails. At first the bed settings would shoot up to 65c (I use PLA basic almost exclusively) and nothing would adhere to the bed. I deleted all of the new ABS filament profiles that appeared with the “upgrade” and I could get it down to 55c. Did all the normal recalibrations, even installed a new nozzle and changed to a new bed plate. Still nothing sticks.

My new X2 came in today and I am afraid to open it up!

2

O.K. I think I finally have it solved. First off the new roll of green filament has a strange consistency. I put in an old half used roll that had been sitting on a shelf for a month or so. Then I got rid of all the multicolor stuff and it seems to be working. probably 1/2 way through a small print and it is doing well.