Flashlight on lidar

user_4015641165 · November 23, 2024, 2:41pm

Hi. I noticed that lidar has a flashligh. Some one kows how to switch it in gcod or somewhere.

JonRaymond · November 23, 2024, 7:00pm

Welcome to the forum.

LED controls

Argument	Value	Usage
M960 S1	0 or 1	Toggle horizontal laser
M960 S2	0 or 1	Toggle vertical laser
M960 S4	0 or 1	Toggle nozzle LED
M960 S5	0 or 1	Toggle logo led
M960 S0	0 or 1	Toggle all LEDs

github.com

jphannifan/x1plus-testing/blob/main/Gcode.md#led-controls

# Gcode Commands for Bambu X1 Printers


## Overview

This wiki provides documentation over BambuLabs Gcode, specifically for the X1 series. A majority of these commands work on other Bambu devices, but we have not tested on other devices. Several of these commands are being documented for the first time, and please take caution when using them. See below for information on the commands that X1Plus uses. 

## Table of Contents
- [Overview](#overview)
- [Homing and Positioning Commands](#homing)
- [Temperature Control](#temperature-control)
- [Movement Commands](#movement)
  - [Linear Movements](#g0-and-g1)
  - [Arc Movements](#g2-and-g3)
- [Coordinates](#coordinates)
  - [Coordinate system commands](#coordinate-commands)
  - [Useful Coordinates](#useful-coordinates)


## Identifying Gcode format and parameters

This file has been truncated. show original

user_4015641165 · November 24, 2024, 2:53am

Thanks a lot. Will use it