Follow the Prusa INDX fiasco for a laugh

You’ve been part of this nice forum for such a long time, and you’ve built a interesting little history here that everyone knows. You could say: common knowledge. If you could just follow the rules that keep our community shining, everything will turn out beautifully for you.

Everyone knows why your posts keep getting deleted, right? Just so you know, it wasn’t because of the word “fanboy”. I’d say it’s because you’re always stirring up trouble.

So there’s no reason to make other users feel insecure. Every opinion is welcome. Your situation is just… “very unique.” Generally speaking, other users aren’t looking to get into conflicts with other users, the moderators, or long-time users.


I’m only writing this so that other users know that every opinion is welcome, but you have to express it politely. Emphasis: politely

Youre breaking the rules right now. The density is real. You also jumped in this thread to stir things up. Congrats

I warned a person against rule breaking and you two hopped in to make stuff up about me. And it will be allowed.

Is calling people karen fanboys, polite? I smell a grudge

(post deleted by author)

squid-the-kid

:face_with_hand_over_mouth:

Please treat this discussion forum with the same respect you would a public park. We, too, are a shared community resource, a place to share skills, knowledge, and interests through ongoing conversation.

These are not hard and fast rules. They are guidelines to aid the human judgment of our community and keep this a kind, friendly place for civilized public discourse. Violations of these guidelines may result in content removal, account restrictions, suspension, or permanent bans.

Be Agreeable, Even When You Disagree

You may wish to respond by disagreeing. That’s fine. But remember to criticize ideas, not people. Please avoid:

Name-calling

Personal attacks

Harassment or intimidation

Hate speech or discriminatory behavior

Responding to a post’s tone instead of its actual content

Knee-jerk contradiction

Content that promotes hatred, discrimination, exclusion, or abuse toward individuals or groups based on protected characteristics will be removed and may result in suspension or permanent bans.

Instead, provide thoughtful insights that improve the conversation.

Your Participation Counts

The conversations we have here set the tone for every new arrival. Help us influence the future of this community by choosing to engage in discussions that make this forum an interesting place to be, and avoiding those that do not.

The platform provides tools that enable the community to collectively identify the best and worst contributions: bookmarks, likes, flags, replies, edits, watching, muting, and so forth. Use these tools to improve your own experience, and everyone else’s, too.

Let’s leave our community better than we found it.

If You See a Problem, Flag It

Moderators have special authority; they are responsible for this forum. But so are you. With your help, moderators can be community facilitators, not just janitors or police.

When you see bad behavior, don’t reply. Replying encourages bad behavior by acknowledging it, consumes your energy, and wastes everyone’s time. Just flag it. If enough flags accrue, action will be taken, either automatically or by moderator intervention.

In order to maintain our community, moderators reserve the right to remove any content and any user account for any reason at any time. Moderators and site operators do not preview new posts and take no responsibility for content posted by the community.

Always Be Civil

Nothing sabotages a healthy conversation like rudeness or harmful behavior.

Respect Others

Be civil. Don’t post anything that a reasonable person would consider offensive, abusive, hateful, threatening, or harassing.

Do not impersonate people, brands, organizations, or official entities in a misleading way.

Do not expose private or personal information.

Do not misuse someone’s identity, likeness, or personal data

It’s great that you brought that up. It’s really good of you to have now familiarised yourself with the rules. Respect! Seriously. I agree with you 100%.

If you find anything in this thread that violates the rules, please let the users in question know right away. It’s best to start with a quote and a friendly reminder; asking a question is also a good approach - it might just be a misunderstanding.


  • One question often accomplishes more than clicking the “Report” button a thousand times and overloading the moderation team.

I haven’t noticed anything like that so far, but perhaps you have a keener eye. Thanks for helping to make the forum a friendlier place. We all really appreciate it. :grin: :+1:


Disclaimer: Of course, I’m not part of the moderation team - I’m just a regular user. Not that anyone would misunderstand my comment. :heart:

Now, do the rules say you can be banned for name calling? Does it say if you see a problem, flag it? You jumped in to start crap. Even lied in your post to make it seem like I was the bad guy. Id say thats a personal attack. A disagreement based on you guessing what the actual rules are. Took the time to post, but not to read. The guy I was actually talking to had called names. The other guy that jumped in also made up a lie to attack me personally.

Then you make a post telling me to point where it hurts. Wtf

thing-are-heating-up

(post deleted by author)

or, in not so many words…

squirrel-excited

:grin:

The gas-lighting and patronizing by the same set of individuals on these forums is starting to get tiresome. I only see threads devolve like this on StackOverflow (which is thankfully almost dead) or Reddit.

Back on topic please.

The INDX is a BondTech invention, not Prusa. The first prototype INDX setups were on Vorons. The Founder’s Edition for Core One was developed in-house at BondTech. The nozzles were developed and machined by BondTech. Yes there was input on the design by Prusa. However Prusa only supplied the firmware update and helped with the printhead board (they have an in-house PnP). Pretty much the entire kit from start to finish was a BondTech creation. BondTech was responsible for the timetable in terms of release and delivery. The units were shipped from Sweden. Did Prusa have a say in this? Most likely there was heavy pressure to get it out the door, but (and I have inside knowledge) they appear to have been blindsided by nozzle situation and didn’t have final say in the scheduling. I personally think that is half-true but as they say, it’s water under the bridge at this point.

Does the INDX have issues? Yes, it does. It shows signs of being rushed. Some of the tool heads were not properly reamed out. The CHT nozzles clog easily. There are issues with some of the print heads (mine is OK) and some of the calibration sensors were bricked on arrival. As for the weak printed parts (the tool docks), that was an own-goal. Whoever was in charge of the farm that day printed them with the PrusaSlicer default setting which is 2 walls and 15% grid infill. They were meant to be printed with 4 walls and 20% gyroid. The “hardened” nozzles was also BondTech’s fault. There was mention by them in November of last year that they might not be truly hardened and they lied about it in their marketing literature and kept lying until they were called out on it. I suspect they were hoping E3D would bail them out in time (which didn’t happen).

I am not a Prusa fanboy as I have stated here and elsewhere. After all my work-horse printer is the H2D and it’s the best printer I ever owned even though Bambu the company are ■■■■■. The INDX is maybe 2 firmware updates away from being a great product for people who like fast multi-color prints and also like to tinker. I’m in the tinker category. I bought into it full-well knowing I was going to be a beta tester.

FormNext 2026 is going to be all about tool changers. Full-stop. Every major brand will either have a tool changer or be introducing one. Linear motors are going to be a thing soon. No more belts! Lots of exciting innovation on the way.

To be honest, this is what I like to see. Even if some of the effort to move the product forward dead ends, the fact that companies are trying to improve is great. Many of these new and announced printers have all the appearances of being more than just cosmetic changes and I love that. I don’t have to want to buy every printer on the market to enjoy it when one advances into new exciting ways.