Hello all, I’m having issues with the top surfaces of my prints, On my P1S and X1C printers I have no issues achieving a quality top surface layer. I run ironing tests to set my flow and ironing speeds accordingly. Below are some images of the issues. Both the streaking appearance and the appearanc…

Sounds like you might be experiencing a similar problem im having. Ive shared some of my experiences so far in this other forum thread. [image] H2C under extrusion Bambu Lab H2C I have my H2C now for a good week and I like the machine a lot. Except my bottom an…

Yeah i saw that thread, but I didn’t notice anyone having the tool marks that i have in the second photo with the pig head, I thought that although they look similar mine looked like a slightly different issue. I purchased the machine on preorder. I imagine it is one of the first batches.

I cant open a new topic yut, but just to say I’ve had a P1S for 2 years and was able to quickly dial in ironing settings for Bambu PLA Matte. I’ve spent the last two weeks though trying to do the same on the H2c, going through countless hours of filament drying, filament calibrations, ironing calibr…

Same story on X2d. [image] Ironing looks terrible on X2D Bambu Lab X2D Hi everyone, I’m really struggling to calibrate the ironing on my Bambu Lab X2D, and I can’t seem to find anything that gives good results. What surprises me the most is the huge differen…

H2C Top surface quality issues

Bambu Lab H2 Series Troubleshooting

TheSpaceJackal March 24, 2026, 6:29pm 2

Sounds like you might be experiencing a similar problem im having. Ive shared some of my experiences so far in this other forum thread.