my xic is hobby only - has about 800 hours on it - lite duty
I noticed a new sound and recorded it here - any ideas what it is and what I can do to address it ?
Here is link to 30 mb mp4 - https://bosshelp.com/tools/PXL_20250620_174332774.mp4
the sound starts at about 10 seconds in
Sorry I don’t have much to add but it sounds very much like my A1 and A1 mini do when they get up to full speed doing circular prints.
Is this not normal for X1/X1Cs?
It’s sound ok to me, but get some of the lube that came with the printer (not the grease) and put it on your Y linear rails, smear it around with your clean finger, it made my X1C a lot quieter.
I lubricated the metal rails and its still sounds like this [Index of /tools]https://bosshelp.com/tools/PXL_20250627_164836154.mp4
seems to be louder than Im used to … Maybe related to an update ? I dont use the printer every day or even every week
lubricated the screw rods and now the sound is clearly from the bed moving up and down - sound a little like a belt squeal - very short but matches the bed movement