Hot end settings H2C

Bambu Lab H2 Series
7

Everything you asked to do is possible. You can learn about all of the features here.

Bambu Lab Academy

For example:

B. Running a Temperature Test (Changing Temp at Set Layer Height)

You do not need an external tool to slice a temperature tower—Bambu Studio supports this natively in two ways:

  • Method 1: Built-in Calibration Tool (Easiest)

    • Click the Calibration tab at the top of Bambu Studio.

    • Select Temperature Tower. Studio will automatically generate a temperature calibration model pre-configured with layer-by-layer temp changes.

Method 2: Manual Custom G-code at Layer Height

  1. Slice your model and go to the Preview tab.

  2. Drag the vertical layer height slider on the far right to the layer height where you want the temperature to change.

  3. Right-click the + icon on the slider and select Add Custom G-code.

  4. Enter the command to set the nozzle temperature:

    • M104 S240 (sets nozzle temperature to 240°C without pausing)

    • M109 S240 (sets temperature to 240°C and waits until it reaches target before continuing)