Hotend pauses on print for a few seconds after finish printing

Bambu Lab P Series
1

Any one know how to change settings/gcod so that the hotend does not pause on the top layer after it finish printing? This leaves a dimple where it paused. Thanks!

2

This should be at the beginning of the End-gcode in machine gcode. there have to be something like “lift z” after print or something

think this should be:

z-lift
z-lift888Ă—721 33 KB

correct me if i´m wrong

3

Thank you very much. I’ll give it a try and let you know.

4

The image is blank ??

5

What you mean? I can see the image with machine g-code

7

The image was blank on Firefox, Chrome and Edge browsers. but It’s OK now.

Do you have a suggestion as to what needs to be changed?

I tried altering the order of the code (to move to a safe place before “wait for the buffer” etc) but it had no effect on the delay.

8

Haven’t figured out what causes the delay but for the first changed the height he’s waiting to finish the print till now

9

Has anyone figured out how to resolve this issue?