Lan mode is notstarting the print anymore

Bambu Lab X1 Series Bambu Lab X1C
1

HI all
I should mention that I’m using the latest Orca build in LAN mode and unfortunately installed the recent X1C firmware update.
Until recently, LAN was working fine. Now when I send a file to the X1C, the file is sent but nothing happens.I have to start it from the internal memory / SD card on the X1C.
I keep getting the message:
MQTT command verification failed, please update the studio or handy.

Any advice on what I can do?
Thanks!

2

here you go > Bambu Connect (beta) | Bambu Lab Wiki

3

Thank you!
But it’s still not working. The file is being sent to the printer, says 100%, and then nothing…

4

Did you set Developer mode on the printer?

5

Thanks that was the solution!

1 Like
6

Glad to hear it. I have no plans to update anything (except OrcaSlicer) until I see how things work out in the next year or so, but it is good to know that developer mode works as advertised.

1 Like