I am doing a large build (About 5 hours, 190g) . The X1c thinks it is complete, but it really stopped with many layers left. This happened twice on two different large builds, at different layers. (Plate 2&3 in the attached .3mf)
When I watch the timelapse, the video lasts the entire expected print time, but for the last third the printhead is just sitting unmoving over the waste chute. So it thinks it is printing, but it isn’t. (There is NOT a ton of weird extrusion in the chute - so it wasn’t extruding the whole time.)
Printer : X1c
Filament: ABS-GF
The print head is stuck here for 1/3 of the time lapse
This is what it is supposed to look like
Here is the .3mf. My slicer settings are standard ABS-GF, but with some stronger infill (50% cubic), 4 wall thickness, and then 100% fill on those two columns.
BackPlate.3mf (553.3 KB)
When asking for help, please provide as much information as possible about your inquiry.
This will help everyone to better understand your problem, and provide you with the best solution.
- Detailed description of the problem
- Printer model used
- Slicer settings used
- Type of filament used
- Photos that clearly show the problem
- .3mf file (if the file can be shared)
- Any potentially useful information that is related to the problem