Anyone have any idea why my first layer is getting messed up. Any help is appreciated thank you [image] [image] [image]

I have had this before, in my case the face for some reason wasn’t perfectly laying flat on the plate when slicing. Half of the bottom layer was perfect and half was scarred

[image] Is this a slicer or .stl problem Bambu Studio It doesn’t look like the face is laying flat on the build plate. First I would try “Auto Orient” (3rd icon from the left at the top) and see if Bambu Studio will fix it. If this doesn’t work, click the object, press “F”…

[image] It prints the first half good but where it stops to change to the colored letters is where it doesn’t sit after that

Did you try what I suggested? The model is clearly not siting flat to the build plate.

Tried the auto orient it seems to be putting it in the same face I did. Trying a test print now. When I click f to select the face this is what the top looks like [image]

Same thing happened. I think it has something to do with me adding the lettering. I printed the bottom of the boxes and they came out great. [image]

If you preview the first layer of gcode. (Right slider all the way down then use the bottom slider to scroll through the layer gcode) Does it preview the full bottom layer?

So this is what it has for later one which is only half of what it should be. This is the half that prints good. I don’t understand what I did to make it not complete [image]

Looks like the face is not actually flat. Maybe you can share the step file, or the process you followed to create it

Layer problem

Bambu Lab P Series Troubleshooting

JonRaymond January 6, 2024, 5:23pm 4