I’m getting these inconsistent starts of the walls. In the picture it’s on the right side of the seam which is the start of the wall. It slowly gets better as the printhead moves around the object and it looks much better when the wall has finished printing (left side)
In case anyone ever have this issue. This could be fixed by using the inner/outer/inner order which equalizes the nozzle pressure by printing the innermost wall before going into the outer wall. This still prints the outer wall before the (other) inner walls so I still get the smooth layer appeance I get from outer/inner order.
What also helped was the “wipe before outer wall” option, but not as much.
