Low nozzle temp: X1C. Want to print with burnout wax

Bambu Lab X Series Bambu Lab X1C
1

I want to print with MachinableWax’s filament wax. They said “if your machine can print with TPU, you can probably print with this wax filament”. problem is, the nozzle temp is supposed to be 150C. The X1C doesn’t want to go below 220C. How can I get around this, and is that possbile? Bed temp should be 80C.

thanks

2

Hi, in bambu studio, select the tpu standard profile and then edit the nozzle temps, and whatever else you need. Then, the printer will print your wax filament at 150C

1 Like