Just had the Micro SD card fail and cause a bunch of weirdness. Specifically Bambu Studio would indicate it had sent the new print job but the printer would then run the last job for some random reason. There was no error message and everything looked normal from the Bambu Studio side of things exc…

I literally just received mine less than two days ago, and the SD card just died after uploading my second print. And I cannot for the life of me get the wifi to connect so I can just use the app. Not a great start :face_with_diagonal_mouth:

I don’t know enough to know what the best format is to use on a Bambu printer. But my IT background has taught me many things and among them regarding Micro SD cards is to start off and sometimes use their associations formatting tools. You can google for them, or go to this link. https://www.sdca…

I also got it but i formated it two times before, hope to fix it somehow

I looked at the app, and i got the 05004016240030 eror

Did you end up finding out why your printer is frying your cards? Has it happened since?

Maybe this is helping: [image] Print Cancelled, but why and by what? Troubleshooting I have a P1S, started a 5 hr print just before bed. Woke up in the morning with a print cancellation notification from the Handy app. Went to check on the print to see why, but I have no…

Similar Issue, 2 months in my SD card failed,(generic Black one) Contacted Support and they sent me a replacement Lexar markex 633x Card, Today it just died again after only 3 months, I’m suspecting it’s less to do with our SD cards and more to do with the printer and how it accesses the SD card.…

Just replaced my 4th dead sdcard. Still having issues with prints stopping due to no sdcard. Removing and reinserting works for an unknown amount of prints until it either dies or can no longer be seen by the printer until I reinsert it. The constant sdcard fails is driving me nuts and costing $ wi…

Are you saving timelapse/video to the SD card? The continued writes are normally what kills a card.

Only for the first month I owned it.

Micro SD Card failure

Bambu Lab P Series

Hamsterberg January 17, 2025, 7:00am 13

Maybe this is helping:

An answer from Bambu: