These suggested setting will work great for 0.4 mm nozzles and above but purging with a 0.2mm nozzle is particularly problematic. Even at low purge volumes it tends to create a perfectly straight column of material that quickly reaches the nozzle and then you just get a big blob building up on the tip you end up getting bits burning onto the nozzle and random yellowed blobs often get carried over into the work area and stick to your print, even when using a prime tower.
If it’s possible, I’d suggest having settings specific to a 0.2 mm nozzle where purges are split into volumes of no more than 200 mm2 before a wipe.