Next update and improvement of the P

Bambu Lab P1 Series General Discussions
1
  1. Chamber room temperature heater ！ important
  2. More powerful component fans ！ important
  3. I don’t think the print size is the most important, but a bigger size is the icing on the cake.

图片
图片474×357 87.2 KB

The biggest problem with the software is that there seems to be no effective and clear smoothing setting.
The most important thing for printing is the smooth transition of each factor, such as temperature, especially the uncontrollable layer temperature, as well as fans, speed, flow, etc. Smoothness throughout the printing process can ensure the best quality.

What do you think?

1 Like
2

I don’t know what I am looking at

But yes, chamber temperature is important

If you could cool down the plastic instantly, basically, you could print stuff mid-air without support!

MV5BNTZjMjlmMzEtY2E4NC00M2RhLTllZjUtNzhlYTg5MzU0NjQxXkEyXkFqcGc@.V1
MV5BNTZjMjlmMzEtY2E4NC00M2RhLTllZjUtNzhlYTg5MzU0NjQxXkEyXkFqcGc@.V1996×753 57.8 KB

Isn’t it the same principle? liquid cool down → become solid

1 Like
3

I am concerned about the layer lines caused by the reduction of printing layer time