Received my P1P today and just finished setting everything up. The SD card does not contain a Benchy file, and I’m not seeing any way to print one, other than slicing myself. I’m interested in seeing the advertised 18-min Benchy, but slicing with the only profile (0.2mm Standard) produces a 48-min Benchy. Anyone know how I can get an 18-min Benchy to print?
Same here, it even shows the file being present in the quick start pamphlet
Downloaded the official benchy and sliced it myself, by default it’s 41 min to print. I made it do sports mode and it took 27min. The cooling suffers in the front of the benchy. (it was printed before I add the extra cooling fan though)
Same here. Benchy seems to be missing from the included SD Card. Did you find it by now?
Same here, can anyone upload the original file as on SD-Card earlier it was?
There is a discussion about this in Reddit as well: https://www.reddit.com/r/BambuLab/comments/107djy9/3d_benchy_is_missing_bambulab_p1p/
They posted a link to this page from BL with the SDCard models Links to STL models | Bambu Lab Wiki
But the Benchy that is linked there is just a “normal” Benchy. They link out to Download – #3DBenchy
Just got my P1P. Also very disappointed to find the pre-sliced benchy is MIA.