Non Stop Printing Issues

Is this latest print with PETG? And is it with PETG or PETG-HF?
PETG is much more challenging to print and hence there are quite a few threads such as this:
[SOLVED] Bad quality when printing PETG

It is usually best to first get it right with PLA before jumping to PETG. That’ll rule out printer issues such as a bent nozzle. Pic’s of the hot end with the print head cover off from 2 angles should tell you immediately if the hot end is bent. It usually shows above the cooling fins.

PETG likes to be printed slower, with all printing speeds preferably below 100.
And never use a crossing infill or surface pattern. Stick to monotonic, gyroid or honeycomb. Otherwise, the nozzle will pick up material from the print.