Nozzle dragging and don’t know what else to do

[LarryCnAZ]

Just a guess, I don’t have a P1, have you read this thread:

Calibration Failure

I’m having problems calibrating my machine. Brand New P1P with second spool of PLA Basic Green. The first roll of prints was fine but failed ever since i ran out and switched rolls. I had to cut the flow calibration short because of the prints. the tip was grinding. I’m attaching both calibration prints [PXL_20250516_213351496] [PXL_20250516_211939072] I’m looking for a little help with what I’m missing. Thanks is advance.

Basically it was suggested you do a factory reset, might be worth a try.