On-going issues with Bambu Lab PETG CF on X1C :(

[Neiljt]

Flow Rate and Pressure Advance Calibration Data on Multiple Filaments

I calibrated these filaments on the cool plate and the high temp plate, depending on the filament type. The purpose was just to see the variation across colors and brands. Bambu X1C using automatic LIDAR calibrations first for Flow Rate and then for Pressure Advance using the calibrated flow rate. Here are the results I got. Wasn’t too surprised to see a big difference between FlashForge ASA and Polymaker ASA. But I was a little surprised on how much difference the color makes. Didn’t matt…