P1s Bricked itself!

Bambu Lab P1 Series Troubleshooting
22

I tried the methods above and i still get this error

Cloud access failed. Possible reasons include network instability caused by interference, inability to access the
internet, or router firewall configuration restrictions. You can try moving the printer closer to the router or checking the router configuration before you try again.
Im 3 feet from my router.
I Have reset everything in the house.
Nada
Also when i do try and connect to my it will give me the error but on the printer it will still show that I’m connected to the router now and when I go to the firmware to check it’s always on the latest firmware i was i was expecting that it would revert back to the factory firmware
I don’t know if that has something to do with the issue but if it is then i guess i have to physically load older firmware

23

You are my lifesafer , i had this problem for 3 Months now ,Thank you

24

I had this issue with my printer today, turned it on, and it wouldn’t connect to the Bambu Studio, nor would it connect to the Bambu Handy app. Both would give me connection errors, making it seem as if the WLAN panel had died. Without performing the factory reset, I was unable to login, as each attempt either wouldn’t let the bluetooth pair to the printer, or bluetooth would connect, but the printer wouldn’t ever find my WIFI connection. Everything else on the network works just fine, just not the Bambu. It’s the second time this scenario has happened, which leaves me less and less confidence in my piece of hardware.

25

Try replacing the SD card.
A bad SD card will bring your printer to it’s knees.

1 Like