PETG-HF vs PLA Question

[CRracer712]

Here’s what I do with PETG HF

What do you find best suits your filament storage needs?

Finally got a scale, actually it was the second scale I’d bought yesterday after returning the first scale that didn’t register .1 grams. Drying all my filament before they enter the storage tubs. First up is my PETG HF Before drying orange [IMG_20240817_160039983] After drying [IMG_20240818_073428228] Before drying green [IMG_20240817_160052674] After drying [IMG_20240818_073415452] Drying temps of the actual PETG HF were ~123°f which was pretty consistent between pointing my IR t…

I then store them in sterilite sealed containers with desiccant. I don’t use the desiccant bags, I’ve dried those and none get the humidity down very low. All my storage boxes with bulk desiccant remain at 10%, according to the cheap hygrometer. A bit more expensive hygrometer puts them at 16%.

I dry the PETG HF, Basic and any PETG/ABS. I’ve not yet bothered to dry PLA.