Hey all,
I’ve had some issues with PLA-CF misprints, I’m using .4 nozzle which they reccomend, kind of new to 3d printing. I have a Textured PEI plate and have made sure i’m not printing any faster than the recommended 250 mm/s. In fact I have slowed any of the faster speeds to 200. I’m printing in .2 mm detail. I did see that the TDS for the PLA-CF were a bed temp of 35-45 and bambu automatically leaves bed temp at 55 through the whole print, I’m guessing because of the PEI Textured Plate. Thoughts?
Interestingly enough the max speed is <200 mm/s. Is there a max speed quick setting, because i noticed in the filament settings there is a min speed?