If 1.00 is entered in the multiplier field and then re-calculate pressed, the table will update.
In the image below:
- Spool 1 is grey PETG and spool 4 is orange PLA Tough.
- The values for the cells in column 1/row 4 and column 4/row 1 have been manually edited to 800 for maximum flushing when printing a PLA Tough part with PETG as the support.
- Spool 2 and 3 are not used for this print so the flushing values are irrelevant.
- I find this easier than using the multiplier.
