I am new to 3d Printing, just got a Bambu A1 a month ago. I have been printing almost non stop other than when I’m sleeping after the print finishes that I started before I went to bed. I was printing new screen cover today with alternate colors and noticed it looked really weird on the Wyze Cam I have set up to monitor it so I went to look and the first layer was full of holes.
I stopped the print and cleaned the bed and tried again but had the same issue. I really haven’t had any issues like this, I had noticed an earlier print today little pieces of black filament on the print like a tiny chunk had stuck and fell off but not that bad. Then the next print, this its really bad now.
PLA Basic Black, I just put the new spool on Yesterday or the day before. It came directly from Bambu Labs. have been printing the Babo Tool Box thing and have printed a full 60mm drawer over night last night in black and it came out perfect.
I have been keeping the 4 spools on the AMS out non stop and have had no issues but if I switch spools I have a vacuum bag setup with packets of Silica Gel to keep them from getting any wetter but since I only use PLA and its under 50% humid in here from research that shouldn’t be an issue. (I hope) but I have printed 4-5 spools of stuff in the last month with nothing like this before and dozens of prints all from maker world.
I use the default print settings from maker world. Only thing I really change is to add a brim for tall items and maybe change the top to Hilbert Curve sometimes. But I have printed this before with no issues. I have a red one on my screen now. I was printing an alternate color. I was printing
Just the top though, so I made a new plate and copied just the cover to it and then loaded 3 more tiny items to it from another print but kept the settings for the screen protector.
I replaced the nozzle. I had a spare, I searched google and saw some pictures of a clogged nozzle, it didn’t quite look the same but I gave it a shot and now its good. Before and After photo attached.
