When printing with engineering materials like ABS, ABS-GF, ASA, PC, PA, PA-CF, PA6-CF, PA6-GF, PAHT-CF, PET-CF, PPA-CF, PPS-CF etc. you can commonly encounter these issues:
- Most of these materials are prone to moisture, resulting in poor print quality (rough surface, oozing, elephant foot effect).
- It can easily cause nozzle clogging when printing these kinds of materials, especially those contain carbon fiber (CF) or glass fiber (GF).
- Potential for weak bonding between layers during the printing.
Our Wiki page is showing the recommended solutions and printing tips when using Engineering materials.