RFIC chip inBambu Lab PC spool died in drier

Bambu Filament and Accesories Filament
1

Hi everyone. Just a quick warning post.

I dried a nearly full roll of Bambu Labs PolyCarbonate PC with my usual drier at the recommended 80c for 8 hours and it cooked the RFID chip!

Dried plenty of PLA and PETG in it before and had no problems.

So beware. Spool still totally useable, just not the convenience of the RFID.

2

Check if there’s is an RFID tag either side of your spool. If only the tag on one side of the spool is faulty, move the spool to another slot and test if the other tag can be read. There are only two readers and they only read the tag in close proximity - in the X1C AMS between slots 1 & 2, and 3 & 4.