Love my X1C and AMS so I decided to get a 2nd AMS and install the Hydra mod. Mod went fine. The only problem I have is that the rear roller in slot 3 (counting from left) rubs the rear of the outside case. The others are fine. Not sure if it’s tolerances in the hydra prints, but everything lined up and screwed back in place properly. Anyone else had this minor issue? Thinking of printing one of these to see if it solves the problem - AMS Hydra Rollers: Forgiving Tolerances Edition
I use the Humebean Hydra rollers on my two Hydra inserts (one 1.05, one 1.09) both work fine without rubbing.
1 Like