Small Nozzle Profiles X1C REVO

Bambu Lab Software Bambu Studio
1

I bought two small Revo Nozzles:
.15 and .25
I print in ASA 95% of the time.
How can I tell my X1C that the nozzles are these sizes. I only see .2 as a small nozzle option. Even if I could say the nozzle is different, how do I compensate the speed and other flow options, if I even knew what they should be?

Any help would be appreciated.

2

Here are the E3D recommendations. It looks like for ASA they only have .25 settings, I didn’t see any .15. Set the nozzle to .2 and change the individual settings in Studio to the suggestions and see how it looks.

Here’s the flow rates for the other sizes, but for .15 and .25 it has NA… so really, really low?

3

Sweet. Big Thanks. Base on the .25 Settings, I think these will be what I try for the .15 Nozzle.

Track width (extrusion width) Preset Layer height Nozzle temp* Wall speed Infill speed
0.16 (use 0.16–0.17) Fine 0.04 mm 240 °C 15 mm/s 30 mm/s
0.16 Medium 0.075 mm 240 °C 25 mm/s 50 mm/s
0.16 Coarse 0.11 mm 240 °C 30 mm/s 55–60 mm/s†
1 Like