Hey everyone, I’ve been in the 3D printing hobby for a while, starting with a MakerBot Replicator 5th Gen, and eventually moving to Creality printers and beyond. I currently run a small print farm with 20 P1S printers and sell full-time on Etsy, Amazon, eBay, etc. However, I’ve been extremely frus…

Been running my A1 everyday for around 10hours a day for 2months now and touch wood no issues at all. Friend bought one recently and also no issues, I have no idea, very strange to hear this.

thanks for the insight, im sure the issue has to be me as everyone seems happy with the a1s

I’ve had excellent results from my A1MINI, ~175 hours printing. Mostly Bambu PLA basic, but I have printed some anycubic PETG in red(not a very nice red, and rather shiny), but it did print well. Also printed quite a bit of sunlu PLA silk lately. I can’t imagine so many printers having the same iss…

I have 1,000 hours on my A1 mini, I had 1,000 hours on my A1 before the recall. No issues on either. I jammed a nozzle, it was my fault. I have no idea what you are doing to these printers. The fact that you have the P and X series printers which you clearly have no problems with confuses thing…

youre absolutely right, everything points to something im doing being the failure point, but the real kicker was one of the 8 brand new ones in this last set not worknig right out hte box when i just did the same thing for the other 7. ive narrowed down the issue to nozzle clogs. which is crazy for …

Have you read this..?? [image] A1 Mini & A1 Users: Solved: Screw fell out of toolhead Bambu Lab A1 mini I’ve seen a few posts here & doing a Google search over the weekend after it happened to me. I noticed my first layer was bad, tramming the bed didn’t fix …

Do you have one of these air quality monitors that provides temperature and humidity info? I’m curious want the ambient temperature is because if it’s too warm, there could be heat creeping up the machine and reaching filament before it enters the nozzle which would generate clogs and other mishaps. …

I have a very cheap version of that lol. the room is the constant variable in this equation, it gets up to 95 degrees f in there at night with all the printers running. with it being an open enclosure and the p1s and x1c never having an issue with the doors open even printing petg and abs i ruled t…

I only own the A1 Mini, so I can’t speak to the P1S and X1C, however Bambu recommends not enclosing the A1’s which is probably due to multiple reasons with one of those being heat creep. Also do both the P1S and X1C have additional fans for circulating some of that chamber air? This would be missing…

The common denominator in all these failures is… you?

[Solved] The a1 is a disgrace to the bambu lab name. i hate the a1

Bambu Lab A Series Troubleshooting

lion7718 September 25, 2024, 1:34pm 11

Have you read this..??