Hi: I have an A1 Mini and I love it, normally it just works great. However, recently it has been showing up a print problem on box walls. I have been printing a lot of Gridfinity storage boxes that are small (up to 4x4 size) and normally they print flawlessly, side walls are perfect. However, re…

Without a photo, anything suggested would be a guess.

I’ll post one as soon as it happens again, but a guess is better than nothing. It looks like the corners of the box have grown fungus like “The Last of Us”. MG

Sell them online like that as branded items and turn a bug into a feature!

I’ve printed about 15 of these a few months ago. I’m gonna take a wild guess & say that the .06 nozzle is the issue…have you tried printing the same model with a .04…??

Thanks Lion: Could be, but I have printed dozens of these with the 0.6 nozzle with no problems. Prints come out beautiful, shiny, layer lines all perfectly regular, base good with no curling, etc. Only recently have I run into this problem, not every print, seems random. I just printed 4 boxes w…

[IMG_20241115_214633] [IMG_20241115_214759] Just printed this, checked it at 10 minutes before it was finished, everything was perfect, then this happened right after I left the printer. GARRRRRGGHHHHH!!! MG

Give this a read: [image] A1 Mini & A1 Users: Solved: Screw fell out of toolhead Bambu Lab A1 mini I’ve seen a few posts here & doing a Google search over the weekend after it happened to me. I noticed my first layer was bad, tramming the bed didn’t fix it. …

Dry your filament or try slowing down the print.

Filament is completely dry, it was sitting in a dryer at 13% humidity and 50C for over a week. Speed might be an issue since I was running it in fast mode. I’ll try running them at a slower speed, but I thought the whole idea behind PETG Rapid was that you could print at higher speeds because it h…

Yeah, Lion, I did read this, but I’m pretty sure this is not the problem. My extruder assembly is tight and does not move, but I’ll be sure and check on this from time to time. Only 300 hours on my machine. Thanks for your time! MG

Spaghetti corners on Gridfinity box print

Bambu Lab A Series Bambu Lab A1 mini

lion7718 November 16, 2024, 1:08pm 8

Give this a read: