I just did that and started a new print after tinkering with the printer again. It didn’t work.
I think the issue is somewhere between the feeder and the extruder as the extruder is working fine but the filament flow just stopped after 5 layers this time. And there is definitely no clog, the filament feed just won’t move.
Thats the 2nd time this happened. I’m 90% sure it’s not the AMS as I tried printing on several AMS positions and the issue persisted.
I think I’m going to order a new filament hub and filament sensor…and open a ticket at BambuLab support. See what they say…
Thanks for your help!