Switch to 0.6 nozzle => only default 0.3mm profile

Bambu Lab Software Bambu Studio
1

Hi,

the title says it all - after switching to 0.6mm hardened nozzles, I see only the 0.3mm system profile.

  • Just updated to latest Bambu Studio 1.7.2.51
  • Reinstalled Bambu Studio with option to delete user data

I don’t want to fiddle around with this myself. I don’t want to switch slicers, I know there are others that may not suffer from this problem.

I found some people with the same problem here but answers were inconclusive.