I have some models which I have to make slight variations of - previously I always made them in Tinkercad and then imported the STLs, but I decide to do future edits in Bambu Studio directly… so imported the plate and then added the text. However recently every time I edit the text I end up with errors saying that there are cantilevers and the plate is above the text so there are gaps etc… the plate is supposed to be 2mm and I set the text to 0.4mm - the text is supposed to be shown on the plate so I print reverse on the bed to get a nice smooth finish. When it works, it looks great - but recently even when I set world co-ordinates for everything to 0 (which I believe should place it directly on the bed) sometimes things are floating or text is lost in the middle of the plate - recently to print a 2mm model depth I had to set it to 2.6mm - but when sliced it was 2mm… so I can only imagine the ‘missing’ 0.6mm’ was below the bed - so I am getting really confused now as how to get this working so I can just edit and align the text each time and not have to keep messing about… can anyone offer any advice, or point me to a good tut?
I have attached an example of how I am doing this.
Thanks in advance
Plate Test.3mf (76.8 KB)