The Bambulab X1 / P1P are PLA ONLY printers! Please proof it wrong!

[Matt]

SOLVED by @Thrawn

[SOLVED] Bad quality when printing PETG

Ok, I made some settings adjustments in the slicer and it solved my problem. Being an absolute newb in 3d printing maybe has some advantages. [IMG_20230316_022759] [IMG_20230316_022809] [IMG_20230316_022816] [IMG_20230316_022825] What I wondered was that the print always failed at the same point, either the line line right before the bridge of the hole or the bridge line itselt. My first idea was acceleration and travel speed, so I reduced them to 200mm/s and 1000mm/s². I…