Printing Inner walls first helped a bit, there was less dragging on the outer wall, but more on the inner wall.
Last night I tried again using info from this thread:
https://forum.bambulab.com/t/a1-nozzle-dragging-on-print-causing-failure-using-08-fine-resolution/
Changed:
Z-hop type to Normal
Travel distance threshold to 0
Unchecked Reduce infill retraction
Normal seams (no scarf)
I also moved the seams to the back of my build and there is a tiny bit of scraping by the seam, but it’s almost nothing, so happy with theses new settings.
Would still like to understand mechanically why this is happening so I don’t have to, print and tweak each time, but at least this build is good…