Using a battery to power a Cob led light

[MalcTheOracle]

I appreciate the response.

@RocketSled

I do use WS2812 LEDs

Same, I have an abundance, strips and matrix panels.

@RocketSled

I don’t do Cyberbrick

I do.

I was hoping someone did the heavy lifting as my ability to solder is greatly limited by tremors.

@RocketSled

So I asked AI for sample code

The code part is easy as the index value would logically be the only change.

I rarely trust AI as it missing a lot of key info and that is without hallucinations.

This is the basic code.

@MalcTheOracle

import machine
import neopixel

// hub 1
pin = machine.Pin(21, machine.Pin.OUT)
np = neopixel.NeoPixel(pin, 10) 
// ^^^^ change 10 to number of LEDs you are changing from 0 

np[0] = (255,0,0)
np[1] = (0,255,0)
np[2] = (0,0,255)
np[3] = (255,255,255)
…
np[9] = (255,0,255) // this would be the 10th
np.write()