I printed this sheath for my scale and it has this obvious blemish. I have almost no skills at analyzing this kind of print problem. When I look at it in the slicer, I see that there’s a color change at about that point. I don’t know if this has anything to do with the blemish but it seems odd to me…

Check your wall setting if Arachne [image] Benchy chimney irregular Troubleshooting Could be evidence of “gap infill” transition with classic wall, arachne changes it to innerwall. See pics. First pair are Classic. Second are Arachne. [Screenshot 2024-02-21 at 10.37.17 p…

I don’t think this is related to the MakerWorld Category, however I think I do know the issue. It seems that the model is not the exact dimensions the whole way up the model. The walls on the bottom are slightly thinner and it gets thicker as it goes up. In those thinner sections the slicer uses “G…

I switched to Arachne and got a much better result. It’s still got some blems, but I think most would consider it a big improvement. Thanks! New pics below: [IMG_5248] [IMG_5249] [IMG_5250] [IMG_5251]

Weird blemish. Appreciate any help

Bambu Lab Software Bambu Studio

GenericUser October 30, 2024, 4:38am 2

Check your wall setting if Arachne