X1C with AMS Print issue and under extrusion

Bambu Lab X1 Series Troubleshooting
1

Hi All I have an X1C with AMS and about 400hrs on it.

I love this thing ! But started having print issue today.

Not seen this one before and thought someone on here might have.

image
image3024×3024 2.08 MB

Thanks

2

Have you tried printing directly not going via the AMS?

If the same may have a partial clog in your nozzle.

3

Thanks for the assist !

4

Update : Two cold pulls fixed this issue.

2 Likes
5

Can i ask whats a cold pull. Good to see someone with decent hours up. Im only new, have you had to do much to it at all over those hours?

6

https://wiki.bambulab.com/en/x1/troubleshooting/nozzle-clog

See item 4

1 Like