About the Bambu Lab P1 Series category

Thud-oops · January 29, 2025, 8:52pm

I did see this about someone having the same issue with Creality slicer (3 yrs old) but no solution.
https://www.reddit.com/r/Creality/comments/u22fjl/gcode_turning_into_wrl_when_slicing/?rdt=44812

3d-print-dog · January 31, 2025, 12:22am

I had forgotten about it until I saw your response. It’s not a priority, just a curiosity.

I have win 10, no idea how I unzipped it, probably the built-in Windows unzipper.

Logboy · February 7, 2025, 10:34pm

What “training?” I got a message from a bot that says greetings, that’s it. I spent a grand on a machine I’m having issues with yet cant even post a question on a forum?

Marcu3D · February 8, 2025, 1:54am

Hello.
I come to use other slicers and printers, and I’m shocked to work with Bambu Studio and my P1S, are amazing

WrapDesign · February 8, 2025, 5:18pm

Hi all so I wonder if I should be worried I have a lot of Electrostatic discharge around area of stepping motor on the left
please look at this video

type here Video platform starting with Y - and add this end /shorts/s7RXtaD9uSM

Mr-Toaster0 · February 10, 2025, 3:24pm

Hello, I got the P1S combo recently, upgrading from an ender 3 v3 se (stock) and was wondering, before the print starts it goes all the way to the back of the print bed and goes back and forth there without purging or anything, I felt like I knew a lot about 3d printers until I got this machine and don’t understand half of what it does…

Thank you!

3d-print-dog · March 16, 2025, 10:36pm

That’s normal behavior for a P1P or S.

Mr-Toaster0 · March 20, 2025, 12:55am

Thanks, it sometimes looks like it levels in the same spot and I was worried it would make the leveling wonky, but if it is supposed to happen it probably doesn’t… thanks!

user_459910431 · March 23, 2025, 8:28am

that is totally stupid! this is why everyone goes on reddit!

HMR3D · March 28, 2025, 12:49am

I buy this expensive printer and run into issues and I am not allowed to ask about it. And don’t get mad this IS very strange to not be able to even ask after completing some childrens puzzle. If someone wants to spam they can still do it.
But I can’t get help? …
I have had it for almost a month no issues and now It started making a blob of PLA on the nozzle nothing sticks to the bed and I have completed thorough cleaning I have tried for 18 hours now and all prints fail.
I even replaced the entire hotend. Followed guides for 18 hours now…
Maybe I should just return it.