Same here, no new topic button???
2 Likes
same, can’t post because no way to create a new topic!
2 Likes
Bonjour,
Je suis nouveau et un peu perdu…
1 Like
I could be wrong, but I think as new users we have to earn some level of trust before we can post? Reading up on that now, a bit annoying when you want to ask a simple question but probably keeps the spam and other issues down a lot 
4 Likes
How the hell do I start a question thread on this forum? I can’t find anyone with the basic sissy questions I have.
1 Like
Well, im in the same boat as the rest of you. Trying to get some help with the AMS, but cant post anything. Guess we just need to read a few posts?
1 Like
You have to up your trust level, it’s a little goofy I know but an anti spam measure I’m sure. Read a bunch of posts, reply to some if needed, then the new post button will appear for you. Hope that helps!
1 Like
Giving you the same reply so you get notified, not sure if you would otherwise: You have to up your trust level, it’s a little goofy I know but an anti spam measure I’m sure. Read a bunch of posts, reply to some if needed, then the new post button will appear for you. Hope that helps!
2 Likes
Yeah, actually, it would be cool if they would be more explicit about how new users can up their trust level and why the “new topic” button is hidden. It’s an unnecessary barrier of entry to new users / customers.
1 Like
Hello. Just trying to build my reputation.
1 Like
So what exactly do I need to be able to post a question?
I thought forum is just for this, to ask questions and get answers. Simply browsing topics that are not helpful with my problem does not help.
Cris.
2 Likes
Hey!
Also mostly looking to earn some trust or whatever to be allowed to post about my X1C seemingly having forgotten the size of its build plate. The 90 degree line at the back of the plate at the start of every print has started being laid down partially outside the plate. Simultaneously, I have started getting weird failures where it seems the nozzle after a while knocks the print over really hard, even tearing apart brims. So not sure if these are connected issues, but it’s both puzzling and very annoying.
(Sorry for the transparent PLA used in this picture, but you can still see how it’s outside the plate) edit: wait why doesn’t the picture show up?
1 Like
I need to create a new post regarding what happen to hot end nozzle. (Literally snapped in half during a print) wanting to know how I can prevent this or is this a normal wear ? How long does a nozzle usually last.
1 Like
Also can’t open a new topic. Brand new user from today!
My problem is I can’t print with Bambu PLA-CF. It shows in Bambu Studion but I can’t select it into the print.
There’s another older topic that describes similar problems but that was resolved by specifying a 0.4 Nozzle size. Mine already had that specified.
I’m missing something - any help appreciated
1 Like
My AMS didn’t automatically recognize my PLACF automatically either.
In Bambi Studio I had to go into the filament list and add the profile from the list, then when loading the filament manually selecting the type in the settings.
After this my printer recognizes the spool.
I’ve also noticed most existing models will have other filaments specified in the setup. I’ll usually just remove all of them by clicking the minus icon then clicking on the name of the filament and then selecting PLACF. Also if you want to get specific about what part to apply the filament to slick on the objects toggle and you can select each object and assign filaments there.
Sometimes I get warnings about print plates not being recommended for use with PLACF, especially if using the engineering plate but you can set the bed temperature to the default the cool plate uses )I think 45°c.
Hope this helps. Let me know!
1 Like
To clarify I know you said you couldn’t select the PLACF. This was kinda counterintuitive to me as well and had to click on the filament I wanted to replace from settings then select PLACF from the dropdown there. No need to remove the unused filaments from the settings as they will just be ignored in the slice.
1 Like
Hi everyone.
Can anyone tell me why my Kingston 256gn micro sd is not showing on the BambuLab X1 carbon printer?
Thanks
1 Like
Hello!
I’m also new to the forum, I have just bought a X1-Carbon. I am having some issue with the print and I was hoping to get some guidance on the forum… but I can’t post a new thread. I did find the button (after scrolling to the end of the section) but I’m not allowed to post it, so… let’s hope I get the authorization quickly.
1 Like
You basically have to spend some time going through the forum then you’ll get an email from them saying you can post
1 Like
Like everyone else here, I’m trying to earn the ability to post a topic, and I’m doing it, apparently, by wasting everyone else’s time with a post unrelated to the topic at hand. My apologies.
1 Like