So my wallet was burning a hole in my pocket and I decided my stacks of filament requires a home. I looked at various filament drier options and decided I need more than dry materials, I need a place to get my boxes and spools under control. So I bought a cabinet. This will fill the bill for me. 18…

[image] user_3353630899: Anytime you have a room full of ad writers consorting, things will get slippery. It’s like a jar of garden slugs. Truth does not exist there. Truer words. :+1: 1234567890

[image] MZip: It would require good drying up front or planning ahead without drying and not so sure how well it would work without pre-drying. There’s going to be some minimum time the average PLA or PETG will need to be in there if not pre-dried but that’s fine. I suspect that if you’ve got…

If I could get your ebay purchase, but with the bolt-on desiccator that allegedly designed to support the 1-10% filament range, and at the same price you bought it at, then for me it would be the no-brainer choice: 4x the space of the Sunlu and lower RH for roughly the same price. What’s not to lik…

@MZip At first this post may read like an off-topic redherring, but bear with me, because it speakss directly to the concern you raised earlier regarding the oxygen concentrator. Reconsidering the oxygen concentrator, I decided to get the facts on the Apollo 1 incident. Perhaps like you, the stor…

Good points all. On an unheated box for drying, totally agree. You probably remember the person who reported here how putting a spool of misbehaving filament in a regular AMS for a day or two dried it enough to get good prints again? He was starting with a spool that had just started misbehaving so…

Excellent feedback. You, grok, and now youtube have convinced me it’s more trouble than its worth. What especially changed my mind was that I hadn’t even considered that the plastic tube delivering the oxygen might burn all the way back to the source: [Oxygen Fires Are Insane!] and if…

That’s a cool video! It gives an idea what the cigar demonstration looked like - an idea - because the flame was shooting out the end of the cigar big time - significantly bigger than just the inside of that tube burning. It was probably a thick 3-4 foot jet of flame with similar sparks in the cigar…

That fits. I once had a 7th grade science teacher, who was an avid scuba enthusiast, as well as holding a masters degree in shark biology, who pointed out that the money shot at the end of the movie Jaws (where police chief Brody shot a rifle at the scuba tank in the sharks mouth, effectively blowin…

I’m going to drop this part of the cabinet conversation to not pollute Sonny’s thread any more but I know some may use compressed gas (air/nitrogen) as a dry air source so included it. But yeah, those tanks have thick walls. An armor-piercing bullet might make it but I’d be skeptical too of a regula…

[image] NeverDie: Maybe the other review was a beta unit or something. Or maybe it’s just a typical Sunlu chabuduo thing.

And the saga continues, A dryer cabinet

Bambu Filament and Accesories Accesories

NeverDie September 8, 2026, 6:50pm 233

OK, I went ahead and created a separate fork:

so anyone wishing to continue any of the topics tangential to the OP here is more than welcome to either start or continue there.