ASA and garolite g10 plate help

[L0rdS474n]

I shared my experience with CFX plates here. They are not G10, but some of the observations may still be relevant:

PSA How to use Wham Bam Carbon Fiber plate for BBL

PETG HF: Bed temperature at 80°C and first layer nozzle temperature at 260°C. PLA Silk+: Bed temperature at 70°C and first layer nozzle temperature at 230°C. PLA Basic: Bed temperature at 70°C and first layer nozzle temperature at 230°C. TPU for AMS: Bed temperature at 80°C and first layer nozzle temperature at 230°C. Note that while this setup ensures a flawless first layer, the material adheres very strongly to the bed. Magigoo Original helps realeasing the print. PAHT-CF: Bed temperature at …

Please keep in mind that I use Magigoo for almost everything, selecting the variant based on the filament type, model size, and geometry, so judge the results with that in mind.

One question: do you heat-soak your printer before starting, or do you begin printing as soon as the bed reaches the target temperature? That can make a significant difference, because G10 and CFX plates do not heat up in the same way as Bambu Lab’s standard build plates.