PSA How to use Wham Bam Carbon Fiber plate for BBL

Bambu Lab X1 Series Bambu Lab X1C
15
  • PETG HF: Bed temperature at 80°C and first layer nozzle temperature at 260°C.
  • PLA Silk+: Bed temperature at 70°C and first layer nozzle temperature at 230°C.
  • PLA Basic: Bed temperature at 70°C and first layer nozzle temperature at 230°C.
  • TPU for AMS: Bed temperature at 80°C and first layer nozzle temperature at 230°C. Note that while this setup ensures a flawless first layer, the material adheres very strongly to the bed. Magigoo Original helps realeasing the print.
  • PAHT-CF: Bed temperature at 110°C and first layer nozzle temperature at 290°C (used Magigoo PA).
  • TPU 95A HF: Bed temperature at 80°C and first layer nozzle temperature at 240°C. Use Magigoo Original or a similar adhesive.
  • PC FR: Bed temperature at 110°C and first layer nozzle temperature at 270°C. Use Magigoo PC or similar adhesive.
  • ASA: Bed temperature at 110°C and first layer nozzle temperature at 270°C. Use Magigoo Original or similar adhesive.
  • PLA Glow: Bed temperature at 70°C and first layer nozzle temperature at 230°C.
1 Like