Bed adhesion failure left side(no aux fan) uneven bed temp

[Skaard]

ALSO refer to this post to see that I am no stranger to Acetone either

How to remove Silk PLA residue "damage" from Build plate

Lots of people with this problem where BL silk can leave a residue that looks like damage on the TEXTURED PEI plate only, it does actually destroy the smooth plate so don’t print silk on that. The solution is Acetone. Here is my before and after. I used the solid Purple Silk to get this to happen, apparently the BL dual color silk has a less likelihood of doing this to your plate as I found out with a different print. [photo_1_2024-06-21_02-21-19] [photo_3_2024-06-21_02-21-19] [photo_1_2024…