Chamber temp display and control

Bambu Lab Software Feature Requests
,
1

I know there is probably issues of missing hardware but still…

If you are in a cold climate or cold season having and keeping a proper chamber temperature is a problem.
Especially for filaments that are rather sensitive or require high temperatures.
Layer adhesion and such comes to mind, same as melting chamber temps going too high during slow extrusions…

I would love to be able to check the chamber temp in Studio rather than using a stick on thermometer on the door.
And wouldn’t it be nice if we could actually set and control the chamber temp?

I mean, there certainly is something in place to make this chamber fan run…
And if there is a temp sensor for this already…
Not being greedy here but being able to let the chamber heat up to a certain temp before starting a print would be beneficial this time of the year.
Within reason of course so the hardware won’t be cooked.

2

You can, in Device tab. Can’t control it but you can view it.

3

It’s in Studio…

image
image1905×635 57.7 KB

And in Bambu Handy. Just thumb the printer icon.

As for a heated chamber, you’ll either need to go for the X1E or Quidi’s or search threads for “chamber heating”.
Just the first 4:

4

Chamber temp is only available on X1C, not P1S if that’s what you have although I also have chamber temp available in bambu studio with my P1S lol

Chamber Temp
Chamber Temp1675×957 91 KB

2 Likes
5

Can’t put that there on the X1C. :open_mouth: It will knock/break the Lidar off the head. Nothing can be placed between the silver Y guide bar and table height on the right side.

6

Who talks about X1C, this is to get missing chamber temp on P1S although I would doubt it won’t fit as the temp sensor is narrower than the metal rib.

P1S Temp Sensor
P1S Temp Sensor956×554 29.2 KB

2 Likes