try share 3mf file with your saved settings.
The nozzle should be pushing downwards and press on the part, that’s for sure (it’s pressing the melted filament to form the line width you set, e.g., 0.42mm for walls, 0.45mm for sparse infills… Etc)
try share 3mf file with your saved settings.
The nozzle should be pushing downwards and press on the part, that’s for sure (it’s pressing the melted filament to form the line width you set, e.g., 0.42mm for walls, 0.45mm for sparse infills… Etc)