MakerWorld Release Note 0724

[MalcTheOracle]

Here are a couple of times I have noted the feature.

Disabling/curating/limiting additional print profiles?

I mentioned the same thing elsewhere on this forum. The problem can be easily solved by determining the envelope of the model(s) on the plate and if it fits within the A1 mini footprint (or could be if automatically moved) then it should be supported. You may not realise the A1 (not mini) profile issue either. If you create a profile using an A1 (not mini) it is NOT compatible with ANY other printer BL sells. The reason is it has the largest footprint of ANY BL printer. It is bigger than th…

How to edit print profle to add A1 Mini?

To solve the problem, the slicer would only need to determine the external envelope dimensions for all printed parts (as they are placed) and then add or remove support for printers as required. They could add a layout preview to the slicer to show the extent of the other printers. Essentially, guide marks where to place model parts to gain full compatibility. Some things will never work though. I have tried printing delicate models on the A1 mini & A1 that fail, yet work perfectly on the P &…

We have spoken about it together before.