New P1S Combo - nothing properly sticks to the build plate anymore

[Lexi]

Try printing it with the AUX fan set to 0 in the filament profile.

Honeycomb wall issue

So, just for kicks I tried printing a section of the Honeycomb Storage Wall (wall-honeycomb-bambu-211x248-fixed.stl off Printables) on my P1P with different plates. I used Overture Black ECO PLA with the Generic PLA Basic slicer profile (220/65) 0.4 nozzle using the 0.20mm standard @BBL P1P built in printing profile Loaded the stock double sided Bambu PEI textured gray plate and cranked it up to “Ludacris Mode” before it started printing. Estimated print time 1h 43m. [signal-2023-12-22-093…