Print quality issues A1 Mini

I am experiencing serious print quality issues with my printer. The layers do not adhere properly, and the infill is inconsistent, resulting in weak and brittle prints.

Everything was good since yesterday, i have nothing change :frowning:

My print settings:

Filament: PLA+
Nozzle temperature: 205°C
Bed temperature: 55°C
Print speed: 200 mm/s
Despite adjusting some parameters, the problem persists. Could this be a hardware issue with the printer? Please advise on possible causes and solutions. I have attached a photo for reference.







Read this thread:

Thank you for your help. The issue turned out to be an error in Bambu Studio during slicing. It was generating empty spaces… After restarting, everything went back to normal.

1 Like

this was a slicer issue, interesting. Im having similar issues, ill try reinstalling Bambu Studio.