Printing from exported plate/gcode without AMS

Bambu Lab AMS Troubleshooting
1

Hi all,

I’m trying to use an externally loaded filament, on a machine that also has an AMS. This was never a problem when the machine (P1S) was connected to the network, but now that I currently can’t use that I wanted to export gcode or gcode.3mf on the SD card.

And that’s when I discovered that, no matter how I set it up, I don’t manage to make sure it selects the external filament. It always wants to use filament from the AMS…

How do I use external filament on a P1S with an AMS when exporting a file from the slicer?

Thanks

2

by disconnectiong the AMS(s). Not joking.

3

Thank you, that indeed works. Strange that I couldn’t find any documentation about it, but if it works it’s all good :slight_smile:

1 Like
4

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.